What are the common problems when A high output twisting machine debugging. As a glass fiber A High Output Twisting Machine manufacturer, let the editors take everyone to learn about it!
1. The tension on the storage wheel may be unstable, and there may be more local air pressure in the production workshop. The speed of the closing line is unchanged, which makes the drawing of the drawing rush not constant value, which can constitute a single wire outer diameter error cannot be accurately controlled.
2. The tremor of the copper wire on the annealing wheel, which makes the copper line annealing at the tight state when it is loose. Therefore, it is easy to form a copper wire on the annealing wheel, so that the appearance of the copper wire is uneven due to the spark effect.
3. The wear of the long -term use of the main motor gear box, which can make the fixed speed wheel speed and the traction speed and the line speed of the drawing.
Processing method: Make well lubrication of the reservoir to prevent it from working against the line to the line at high speed and make the thread thinner; adjust the tension of the thread to make the drawing stroke close to the annealing wheel; Ensure that the annealing wheel steel ring is not available, and the hemolid current is unstable due to the appearance defects of the steel ring.
a high output twisting machine https://www.newheli.com/KV2020-HIGH-SPEED-COMPOUND-TWISTING-MACHINE.html
